Commonly used farm machinery disassembly tips
Common agricultural machinery disassembly and assemblyTips
agricultural machinery is repaired, it is often disassembled and installed. There are many types and brands of agricultural machinery with different structures. If it is disassembled and installed, it is easy to damage the agricultural machinery. Therefore, in the removal and installation, should be strictly in accordance with the rules.
removal. According to the different structure of agricultural machinery, the operating procedures should be considered in advance to avoid inversion. When disassembling, it should be carried out from outside to inside and from top to bottom. Special tools should be used during operation, and it is forbidden to hit the parts directly with a hammer. To find out the loosening direction of the parts, the precision parts should be carefully operated. For example, the long axis parts of the screw rod must be hoisted with ropes and wrapped with cloth to prevent bending deformation and damage. The removed parts shall be placed on the wooden frame, wooden box or parts tray in turn according to the requirements, and shall not be placed on the ground to prevent damage and corrosion. The removed parts should be sleeved together as much as possible according to the original structure, such as shafts, gears, screws, gaskets, positioning pins, etc. For parts that are processed in complete sets or cannot be exchanged, mark them before disassembly and string them with ropes to avoid confusion, such as gear sets, valves and valve seats, tubing joints, etc., and the parts on the valves should be plugged into the original valve body. Parts that can still be used without repair should not be disassembled and misplaced, such as splines and gears, shafts and bearings. In order to facilitate the inspection of parts, the removed parts should be cleaned as necessary, and then coated with oil to prevent corrosion.
installation. In the assembly of agricultural machinery should be in accordance with the order from the inside to the outside, from top to bottom, in order not to affect the next process as the principle. During operation, the important and complicated parts shall be inspected repeatedly to avoid wrong installation or missing installation. Be careful not to let dirt into the parts during installation. The installation process should also be strictly in accordance with the technical requirements of item by item inspection. After the machine is assembled, it must be adjusted and tested in time.

