Shandong Shifeng Group
Shandong Shifeng Group
Enterprise Profile
Shifeng Group, formerly known as Chengguan Repair Club, was founded in1963, located in Gaotang County, Shandong Province; Shi Feng Group was established on May 18, 1993. The main products are three-wheeled vehicles, commercial vehicles, electric three-wheeled motorcycles, tractors, single-cylinder engines, nylon chemical fibers, new scaffolding, etc. Agricultural automobile industrial park, agricultural equipment industrial park, thermal power industrial park, nylon industrial cloth industrial park, commercial automobile industrial park and modern agricultural equipment industrial park have been built. It has a national industrial design center, a nationally recognized enterprise technology center, a key laboratory of agricultural machinery power and harvesting machinery of the Ministry of Agriculture, a post-doctoral scientific research workstation, and an academician workstation.
Main Agricultural Machinery Products
1.4YZP-3B Self-propelled Corn Harvester
performance characteristics:
● new arc cab, beautiful appearance, wide field of vision.
● New adjustable direction machine, driving more convenient, reduce driver fatigue.
● The header adopts a mature ear-picking roller-type ear-picking header double-bridge conveyor structure, which can realize off-line harvesting of corn, super-capacity transportation, and has high reliability, high work efficiency, and adaptability.
, small grain damage and low impurity content.
● Adopt double bridge conveying structure, with strong conveying capacity, high working efficiency and no blockage. The front bridge shell adopts 3mm thick steel plate to improve the strength of the front bridge; the power of the front bridge is changed from the front drive shaft input to the rear drive shaft input.
● Yuchai 125 horsepower high-power diesel engine is equipped with large power reserve, reliable performance, excellent and rapid service, providing reliable power for the normal operation of corn harvester.
● Optional Yuchai 101 kW high-power diesel engine.
● The peeling machine adopts four groups of 16-roll peeling devices with mature wind. The structure, stripping rate and stripping efficiency of rubber roller are much higher than the national standard, and the grain loss is small; double auger corn
skin transport, separation thoroughly, small grain loss.
●It can be equipped with a bract shredding device, which has a good shredding effect of corn husk, and effectively solves the blockage problem of the common bract shredding device used by various manufacturers on the market.
●Adopt weighted split drive axle, with reasonable structure, strong bearing capacity, reasonable speed ratio, stable and reliable performance.
●Adopt a new type of enhanced continuously variable transmission device to reduce the frequency of shifting and make driving and control more convenient.
●The working clutch adopts a heavy-duty friction plate working clutch dedicated to large corn harvesters, which transmits power smoothly and has high reliability, effectively solving the problem of frequent belt burning of ordinary belt working clutches.
●Equipped with a new rear-view system, the working status of the peeling machine can be observed in the cab, and the visual reversing can be realized, which effectively reduces the occurrence of failures.
● Using the method of returning the field with front and rear double straw returning machines, returning the field twice after completing one work, with good crushing effect.
● The method of returning to the field after the front cutter can be selected to reduce power consumption.
● It can be equipped with upper and lower cleaning fans, making fruit ears and grains cleaner, suitable for corn harvest in northeast, northwest and other regions.
2.SF500/504
SF500/504 greenhouse king model is developed on the basis of ZTS series chassis. The matching power is a four-cylinder engine with a calibrated power of 50 hp. The whole machine has low height and good passability. Both two-wheel drive and four-wheel drive adopt hydraulic steering. The operation is light and flexible. The whole vehicle has good driving stability. It is equipped with different machines and tools and can be used for field operations such as farming and fertilization. It is an ideal operation machinery for vegetable and flower greenhouse planting and garden management.
1. Wide speed range, more reasonable gear distribution, 16F 12R gear, with built-in retrograde device, optional crawler and overdrive gear;
2. Side-mounted operation, flexible and convenient. The main transmission speed is synchronizer shifting, and the auxiliary transmission and crawling gear are meshing sleeve shifting;
3. The power output clutch is multi-disc wet type, button type electro-hydraulic control, optional
540/760/1000r/min and other speed, can meet different operation requirements;
4, wet, disc self-booster brake, hydrostatic control, parking brake for independent operation of the service brake, safe and reliable;
5. The front drive axle adopts Carraro structure and integral axle housing; it adopts wet multi-disc clutch and button electro-hydraulic control, which is light, flexible, safe and reliable;
6. The lifter is a double-cylinder external type, with strong lifting and strong lowering function, large lifting force and convenient maintenance. The connection between the lower pull rod and the machine adopts an adjustable quick coupling device;
7. Multi-channel hydraulic output device can meet the various needs of various hydraulic machines and tools;
8. The new luxury cab has a large space, a wide field of vision, good sealing performance, and a heating and air conditioning system to ensure comfortable driving.
official website
http://www.shifeng.com.cn/index.htm
Contact Information
Phone:0635-3953153
mailbox:sfjtpgz@163.com
Address: Shifeng Road, Gaotang County, Shandong Province1.

