Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
5HXG-30C batch circulating grain dryer
high efficiency
●Using low temperature and large air volume thin layer material drying technology and reasonable slow su system, the grain moisture is uniform after rapid drying, and the rate of waist explosion is low, so as to ensure that the grain keeps high quality after drying.
high quality
● Unique drying system, no dead angle, uniform drying, uneven rate ≤ 1%;
● Special high temperature resistant grain barbecue fan, high temperature resistant up to 80 ℃, with high efficiency, low noise, compact structure, small footprint, power consumption is 10% smaller than the traditional fan, life increased by 20%;
● Fully automatic drying control system, comprehensive and systematic reliable data, control the drying temperature according to the grain moisture to ensure the grain quality;
● Material flow pipes and mechanisms are made of wear-resistant stainless steel materials to improve the operating life of the machine by more than 50%;
● Machine running bearings are all high-quality maintenance-free bearings to extend the service life of the machine and improve the reliability of machine operation.
low crushing
Low-speed anti-crushing hoist, low-speed can prevent grain from being crushed during loading and unloading in vertical transportation;
● Polymer wear-resistant bucket, unique unloading gas and edge design, soft contact with grain, high loading efficiency, reducing grain friction and crushing;
● Anti-feeding roller mechanism effectively prevents grain from entering the lower roller and squeezing between the bucket.
intelligent
● Configure on-line moisture meter, real-time dynamic and accurate monitoring of grain moisture, reach safe moisture, and automatically turn off hot air to enter natural air cooling operation mode;
● Equipped with remote monitoring and data feedback module to realize customer remote monitoring of real-time machine usage.
form of heat source
● can choose a variety of general heat source heating: biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam.
Model | Unit | parameters | |
structure type | / | Batch Cycle | |
drying method | / | indirect heating | |
Drying Process | / | crossflow | |
Overall dimension of the body (length×width×height) | mm | 3090 × 2260 × 11328 | |
Batch Volume | t | 30 | |
precipitation rate | %/h | 0.6-1.2 | |
effective volume | m3 | 53.58 | |
Hot air temperature range | °C | 30-120 | |
Air supply type of hot air blower | / | negative pressure | |
Required Power | V/Hz | Three-phase four-wire with grounding 380/50 | |
| kW | 16.57 | |
Heat source type | / | Biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam | |
heat source | KJ/h | ≥ 1250000 | |
Security Configuration | / | Hot air temperature sensor, circuit breaker, thermal relay, AC contactor abnormal overheating, overload, short circuit, open circuit protection, full load alarm | |


