Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
5HXG-15C batch circulating grain dryer
high efficiency
●Using low temperature and large air volume thin layer material drying technology, the drying efficiency is increased by more than 10%, while ensuring that the dried grains maintain high quality
intelligent
● Equipped with online moisture meter, real-time dynamic and accurate monitoring of grain moisture, reaching safe moisture, automatically closing hot air into natural air cooling operation mode;
● Equipped with remote monitoring and data feedback module to realize customer remote monitoring of real-time machine usage.
high quality
● Unique drying system, no dead angle, uniform drying, uneven rate ≤ 1%;
● Special high temperature resistant grain barbecue fan, high temperature resistant up to 80 ℃, with high efficiency, low noise, compact structure, small footprint, power consumption is 10% smaller than the traditional fan, life increased by 20%;
● Fully automatic drying control system, comprehensive and systematic reliable data, control the drying temperature according to the grain moisture to ensure the grain quality;
The material flow mechanism adopts wear-resistant stainless steel material to improve the working life of the machine by more than 50%;
● High-quality maintenance-free bearings are used for machine operation bearings to extend the service life of the machine and improve the reliability of machine operation
low crushing
● The upper discharge adopts anti-blocking and wear-resistant stainless steel pipe, and the lower discharge adopts low-speed and large-gap screw conveyor to reduce the crushing rate of mechanical conveying materials;
Low-speed anti-crushing hoist, low-speed can prevent the grain from crushing during loading and unloading in vertical transportation; polymer wear-resistant winch, unique unloading gas and edge design, soft contact with the grain, high loading efficiency, reduce grain friction and crushing; anti-material feeding roller mechanism, effectively prevent the grain from entering the lower drum and crushing between the bucket.
form of heat source
● can choose a variety of general heat source heating: biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam.
Project | Unit | parameters | |
structure type | / | Batch Cycle | |
drying method | / | direct heating/indirect heating | |
Drying Process | / | crossflow | |
dryer body (length × width × height) | mm | 2000 × 2000 × 9875 | |
Batch Volume | t | 15 | |
precipitation rate | %/h | 0.5-1.2 | |
effective volume | m3 | 26.78 | |
Hot air temperature range | °C | 30-120 | |
Air supply type of hot air blower | / | negative pressure | |
Required Power | V/Hz | Three-phase four-wire with grounding 380/50 | |
| kW | 9.74 | |
Heat source type | / | Biomass hot blast stove, electric heat pump, oil burner, natural gas burner, steam | |
Security Configuration | / | Hot air temperature sensor, circuit breaker, thermal relay, AC contactor abnormal overheating, overload, short circuit, open circuit protection, full load alarm | |
heat source (output heat) | KJ/h | ≥ 800000 | |


