Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
Kowon Automatic Peanut Shelling Machine Automatic Peanut Shelling Machine, Peanut Peeling Machine
product introduction:
Peanut shelling machine is a professional equipment for peanut shelling. It integrates peanut shelling and shell kernel separation. It has the characteristics of simple structure, convenient operation, low power consumption and low noise. Is the vast number of farmers friends to rich good helper! Peanut shelling machine is through the high-speed rotation of the body, the peanut shell off. Simple structure, reliable use, convenient adjustment, low power consumption, is your first choice to make a fortune!
working principle:
peanut shelling machine frame, fan, rotor, single-phase motor, screen (size two), into the hopper, vibrating screen, triangle pulley and its transmission triangle belt and other components. After the normal operation of the machine, the peanut is put into the feed hopper quantitatively, evenly and continuously. Under the repeated blow, friction and collision of the rotor, the peanut shell is broken. Peanut grains and broken peanut shells pass through a sieve with a certain aperture under the rotating wind pressure and blow of the rotor (large-hole sieve is used for the first threshing of peanuts, and the small peel fruit after cleaning is replaced with small-hole sieve for the second shelling). At this time, peanut shells and grains are blown out of the body by the blowing force of the rotating fan, and peanut grains are screened by the vibrating sieve to achieve the purpose of cleaning.
the correct use of peanut shelling machine several requirements:
1. Requirements for shelling machine. 1) shelling clean, high productivity, the shelling machine with cleaning device, but also requires a higher degree of cleanliness. 2) Low loss rate and low breakage rate. 3) Simple structure, reliable use, convenient adjustment, low power consumption, certain versatility, and can take off a variety of crops to improve the utilization rate of machines and tools.
2. Requirements for peanuts (skin fruits). Peanut is suitable for dry and wet, too dry is high crushing rate; too wet is the impact of work efficiency. Rural storage of peanuts (peel fruit) is generally dry, in order to make it suitable for wet and dry can be used the following methods. 1) winter shelling. Before shelling, spray about 10kg of warm water evenly on 50kg of peel fruit, cover it with plastic film for about 10 hours, then cool it in the sun for about 1 hour to start shelling, cover it with plastic film for about 6 hours in other seasons, and the rest are the same. 2) The relatively dry peanuts (peel fruits) can be immersed in a large pool, immediately after soaking, they can be fished out and covered with plastic film for about 1 day, then they can be dried in the sun, and shelled when the dry and wet conditions are suitable.
3, the requirements of the voltage and the choice of the workplace. Single-phase motor to work properly, the voltage needs to reach its rated voltage. In rural areas, there is only one transformer in a village, and households are scattered. In addition, the wires and circuits used are not very standard, resulting in insufficient voltage for users far away from the transformer. Therefore, the workplace should choose a place closer to the transformer.
Operation matters:
(1) Due to the tight work and harsh environment of the shelling machine, the personnel participating in the shelling operation should be educated on safe operation to make them understand the operation procedures and safety knowledge, such as tight sleeves, masks and protective glasses.
(2) Before using the shelling machine, it is necessary to carefully check whether the rotating and swinging parts are flexible and free of collision; Check whether the adjusting mechanism is normal and whether the safety facilities are complete and effective; Ensure that there is no debris in the machine, and add lubricating oil to each lubricating part.
(3) Before starting the shelling machine, the operating site should be cleaned up, and no sundries unrelated to shelling should be placed; children are prohibited from playing on the field to avoid accidents.
(4) When working, the feeding should be uniform. Peanuts should be directly pushed into the drum. Peanuts should not be pushed into the drum by hand, branches and other tools. Prevent stones, sticks and other hard objects from being fed into the machine.
(5) The joint of the transmission belt should be firm; it is strictly forbidden to pick up the belt or touch any object to the transmission part when the machine is running.
(6) The transmission ratio between the selected matching power and the shelling machine should meet the requirements, so as to avoid damage to the parts or loosening of the fasteners due to the high speed and severe vibration of the shelling machine.
(7) shelling machine can not be continuous operation time is too long, generally work for about eight hours, it is necessary to stop inspection, adjustment and lubrication to prevent serious friction wear, heat deformation.
(9) If the shelling machine fails during the operation, it should be shut down for maintenance and adjustment. It must not be dealt with to avoid greater failure.
repair and maintenance:
(1) After shelling, the dust and debris in the machine should be carefully removed; the paint should be repainted as required where the paint falls off during use.
(2) Welding repair shall be required for deswelding and cracks.
(3) After the drum of the shelling machine is repaired, static balance debugging shall be done until the debugging is balanced.
(4) Check whether the guard plate cover of shelling machine is firm, and replace the damaged one.
(5) Complete maintenance, fill sufficient lubricating oil to each oil injection point and lubrication point, and coat the thread of each adjusting screw with oil to prevent rust; Place the sheller in a dry and ventilated shed, and be careful not to put sundries on the sheller to prevent deformation.
product parameters:
Dimensions (L×W×H): | 90 × 65 × 135 |
productivity; | 350kg/h |
stripping rate: | 98% |
breakage rate: | 2.0 percent |
damage rate: | 4.0 percent: |
weight: | 100kg |


