Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
farmer NF-802 crawler tractor
product introduction:
NF series rubber crawler tractor is an upgraded product of Q series light crawler tractor. Its main features are as follows: it adopts hydraulic control planetary differential steering mechanism, steering wheel control, realizing forward and reverse rotation of left and right crawlers, small turning radius and less backlog, light and flexible operation; In-line gearbox is directly connected with engine, meshing speed change mechanism, wide speed change range, high transmission efficiency, high traction power and low fuel consumption. Integral frame, rubber track triangle walking mechanism, the ground clearance is high, the grounding ratio is small, and the passing performance is good; the force and position adjustment suspension device is adopted, and a variety of agricultural machinery and tools are used to complete multi-purpose operations such as ploughing, rotary tillage, ridging, trenching, loading, and drilling. The product is suitable for power machinery for paddy field and rape tobacco farming in rice producing areas, especially suitable for comprehensive farmland operations in the south and hilly areas.
product parameters:
|
Model |
NF-802 |
|
|
Dimensions |
length × width × height (mm) |
3690 × 1770 × 2400 |
|
Weight |
(Kg) |
2660 |
|
Minimum ground clearance |
(mm) |
420 |
|
engine |
Model |
YD4EZ80C1 |
|
form |
Turbocharging |
|
|
Rated power (kW) |
58.8 |
|
|
Fuel |
Diesel |
|
|
Calibration speed (r/min) |
2400 |
|
|
Start Mode |
electric start |
|
|
steering brake system |
Steering system type |
planetary differential steering |
|
Type of brake system |
Wet friction type |
|
|
drive train |
Clutch type |
monolithic single action |
|
gearbox type |
(4 4)* 2 Mechanical composition |
|
|
gearbox shift mode |
shift sleeve |
|
|
Walking Department |
Rack type |
rigid frame type |
|
track pitch × number of sections × width |
54*90*400 |
|
|
Theoretical speed of each gear (km/h) |
Low: 1.47;2.16;3.52;4.62; High: 5.48;8.05;13.09;17.18 |
|
|
Low: 1.171.71;2.79;3.66; High: 4.35;6.38;10.8;13.63 |
||
|
working device |
Hydraulic suspension system type |
Semi-split |
|
adjustment mode |
Force level adjustment |
|
|
Power output shaft type |
Rear-mounted, non-freestanding Type 1 |
|
|
PTO speed (r/min) |
720/1000 |
|
|
Power output shaft spline and outer diameter mm |
8/38 |
|


