Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine
product introduction:
1,Mixing box body: the box body is subjected to roll hardening treatment, anti-rust treatment, smooth transition, uniform wear, and extended service life;
2. Transmission mode: transmission shaft, gearbox, auger-full mechanical transmission, single auger rotary cutting, spiral main auger device, auger blade after rolling hardening treatment, can hold up more materials for circular mixing;
3. Double-speed gearbox: double-speed adjustable gearbox, double-speed cutting; According to the material situation, the main auger speed can be selected for cutting;
4, the main auger blade: the main auger configuration 16 pieces of hard alloy blade, blade configuration to strengthen the knife holder, prolong the service life of the blade;
5. Fixed knife block: each corner of the box is equipped with a fixed knife. According to the cutting situation, each fixed knife block has 4 adjustable fixed positions;
6. Weighing system: electronic weighing system, which can display the weight change and quantitative weighing in real time, and has an early warning function, the measurement error is less than 1%, and the power supply voltage can be detected;
7, unloading system: double-sided hydraulic control automatic unloading, can be unilateral unloading, can also be bilateral unloading at the same time;
8, traction frame adjustable traction height of more than 4 positions, can adapt to various brands of tractors;
9, observation table and steps: configuration observation table and steps, convenient to observe the mixing situation, to ensure personal safety;
10, control mode: mechanical remote pull bar control, the driver can operate the feed preparation machine in the cab;
11, standard large angle PTO drive shaft.
product parameters:
Dimensions | length 7434mmX width 2650mmX high 2970mm | ||||||||||
self-weight | 6720kg | ||||||||||
Maximum load | 16500kg | ||||||||||
mixing uniformity | ≥ 95% | ||||||||||
forage cut length | ≤ 125px | ||||||||||
metering accuracy | ± 1% | ||||||||||
Total time per work cycle | ≤ 40min | ||||||||||
The noise level of the machine is less | 85 decibels | ||||||||||


