Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
YCD704
product introduction:
·independent research and developmentnew strengtheninggearbox, central drive, final drive, power output have been strengthened;
·adopts a front drive axle with a large steering angle for the king of the big shed, and the steering radius is small;
·supporting the whole diesel four engine, large torque reserve, sufficient power, fuel economy;
·adopts new multi-functionMain and auxiliary dual fuel tanks, the volume can reach 65 liters;
·new LED headlamp, brighter brightness, energy saving;
·add large water tank, heavy load operationNo.high temperature;
·new external dry air filter, engine intake volume, easy to clean and maintain;
·adopts ceramic friction plate diaphragm clutch, smooth operation, high temperature resistance and reliable performance;
·a variety of tire configurations, standard tires: 6.00-14/13.6-20, optional: 70/85-12/13.6-16, 6.00-12/9.5-20, 5.00-12/7.5-16 front and rear high flowers;
·Configurationonetype strong pressure lifter and after traction, optimized design, convenient disassembly;
·is equipped with slow-down valve and limit valve, which can control the speed of lifting and the depth of tillage;
·The whole machine has high operating efficiency, ultra-short wheelbase, large steering angle front axle, and operating efficiency is 30% higher than similar products.
product parameters:
Whole machine model | Yellow Sea Golden HorseYCD704 | ||
Engine Model | QuanchaiV30-75C42 | ||
Engine work(kW) | 51.5 | ||
Rated engine speed | 2400 | ||
Dimensions(long×wide×high) mm | 3100X1250X1220 (steering wheel) | ||
Wheelbase(mm) | 1580 | ||
Common wheel track | 1020/1010 | ||
track (front wheel/rear wheels) (mm) | 1020/970~1050 | ||
Tyre Model(/) | 6.00-14/13.6-20 | ||
Minimum use quality(kg) | 1970 | ||
Max. counterweight(/)kg | 0/50 | ||
Minimum turning circle radius(m) | 2.5 | ||
Ground clearance(mm) | 250(front axle middle position) | ||
gearbox | 8+2 | ||
Speed Rangekm/h | 2.04~31.09 | ||
Tank Capacity(L) | 65 | ||
maximum traction(KN) | 14.8 | ||
Hydraulic lifting force(KN) | 12.4 | ||
hydraulic output groups | 1 | ||
Power output shaft speed (r/min) | 540/760 | ||


