Lancang-Mekong Countries Agricultural Mechanization Advanced Applicable Technology and Equipment Exhibition and Cooperation Platform
Lancang Mekong Countries Exhibition and Cooperation Platform for Advanced and Applicable Agricultural Mechanization Technology and Equipment
Zhetow 704 tractor
product introduction:

product parameters:
|
type |
704 |
||
|
drive type |
four-wheel drive |
||
|
mm |
full length |
4210 |
|
|
full width |
1990 |
||
|
Full height (to top of exhaust pipe) |
2510 |
||
|
wheelbase |
2140 |
||
|
wheel track |
front wheel |
1400-1600 |
|
|
rear wheel |
1450/1550/1650/1750 |
||
|
Lowest ground clearance |
365 |
||
|
engine |
Model |
A4K43T70A |
|
|
type |
In-line, water-cooled, four-stroke, direct injection combustion chamber |
||
|
12 hours calibration power (kw)/speed (rpm) |
51.5/2300 |
||
|
use of fuel |
Diesel |
||
|
Fuel tank volume (L) |
65 |
||
|
Tire |
front wheel |
6.50-20 or 7.5-16 (two-wheel drive)/8.3-24 or 9.5-24 (four-wheel drive) paddy wheel 8.3-24 |
|
|
rear wheel |
12.4-32 paddy wheel 11-32 (optional 14.9-28 or 14.9-30) |
||
|
Clutch |
Basic type: dry, single-plate, double-acting clutch Optional type: dry, double-plate, double-acting |
||
|
brake |
Wet, double disc brake |
||
|
steering gear |
full hydraulic steering |
||
|
gearbox |
Composition formula (2 1)* 4(8F 4R) |
||
|
travel speed (km/h) |
2.278-29.265 |
||
|
the mostlarge traction force (kn) |
≧ 23.5 |
||
|
Hydraulic output multi-way valve |
single group (optional double group) |
||
|
ploughing depth control mode |
force adjustment, position adjustment |
||
|
front axle |
front middle seedling transmission |
spiral bevel gear (four-wheel drive) |
|
|
Front differential |
closed, 4 planetary bevel gears (four-wheel drive) |
||
|
|
end planetary gear (four-wheel drive) |
||
|
rear axle |
central drive |
spiral bevel gear) |
|
|
Differential |
closed, 4 planetary bevel gears |
||
|
|
single-stage planetary gear |
||
|
power output shaft |
speed (rpm) |
Basic 540, 720 optional 540, 1000 |
|
|
|
spline size (mm) |
|
basic type 8-38*32*6 optional type 6-34.79*28.91*8.69 |
|
three-point suspension (device) |
Three-point rear suspension Class II |
||
|
hydraulic suspension system **large lifting force |
≧ 13 |
||

